User manual

Appendix F 139
S44 Bit-Mapped Option Status
Default = (17h) (023d) (00010111b)
Bit 0 V.42bis status
0 disabled
1 enabled
Bit 1-2 V.42bis selection ("H
n
)
00 "H0 is selected
01 "H is selected
10 "H2 is selected
11 "H3 selected
Bit 3 Reserved
Bit 4 Auto fallback/fall forward selection (%G
n
)
0 %G0 is selected
1 %G1 is selected
Bit 5-7 Reserved
S46 Automatic Sleep Timer
0-255 Sleep delay - unit = 100 ms
Specifies the time the controller waits before going to sleep. The data pump is not affected.
0-254 = 0-25.4 s
Default value = 255 (disabled)
S47 Forced Sleep Timer with Powerdown Mode in PCMCIA
0-255 Sleep delay - unit = 100 ms
Specifies the time the controller waits before going to sleep. The data pump is not affected.
0-254 = 0-25.4 s
Default value = 255 (disabled)
S48 Set Autoreliable Buffer (\C
n
)
Default = 000
0 \C0 is selected
1 \C1 is selected
2 \C2 is selected
S49 Set Maximum Block Size
Default = 255
63 = 64 bytes = \A0
127 = 128 bytes = \A1
191 = 192 bytes = \A2
255 = 256 bytes = \A3
S50 FAX/Data Mode Selection
Default = 000
0 Data mode
1 FAX mode