User manual

Appendix F 143
Result Codes
The modem connect message is controlled by ATQ, ATV, ATW, ATX, and AT\V.
Display Format Options
If ATQ1 is selected, there will be no connect message at all. The following description is true only if ATQ0 is
selected.
If ATX0 is selected, “CONNECT” or “1” will be used for all DTE and DCE speed regardless of ATW and AT\V
options.
The following description is true only if ATX0 is NOT selected.
If ATV0 is selected, all the messages will be displayed in numeric format, such as “0” for “OK”, “1” for
“CONNECT”, etc.
If ATV1 is selected, all the messages will be displayed in verbose format, such as “OK”, “CONNECT 14400”,
“CONNECT 14400/LAP-M”, etc.