Technical data

PortServer Terminal Server Page 51
cmdprompt=character_string
Use to define the PortServer command prompt. Default is digi>. (The root prompt
of ># cannot be changed.)
logprompt=character_string
Use to define the login prompt (up to 11 characters). Default is login:. Root
privileges required.
login=on|off
Use to set whether the user is required to log in before using terminal. Default=on.
Root privileges required. Important! login must be ON for Auto users.
write=on|off
Use to set whether the user (other than root) can save to the EEPROM. Default=off
(user cannot write to EEPROM). Root privileges required.
passprompt=character_string
Use to define the login password prompt. Root privileges required. Default is
passwd:
passwd=on|off
Use to set whether the user is required to give a password before using terminal.
Default=on
range=startport#-endport#
Specify a range of ports to be modified.
save=on|off
Save the changes to EEPROM.
verbose=on|off
Use to eliminate “connection” messages before the login prompt. (Useful to batch
programmers.) Default=on