User`s guide

Introduction
16
Connection management:
Manage serial port connections
Management > Serial Ports 145
Manage active system
connections
Management > Connections > Active System Connections 145
Domain Name System (DNS):
DNS Client
Configuration > Network > Advanced Network Settings 82
Ekahau Client™ device-location
software
Applications > Ekahau Client 120
Ethernet settings Configuration > Network > Advanced Network Settings 82
General Purpose Input/Output (GPIO)
pins
Configuration > GPIO 93
Event logging for the Digi device Management > Event Logging 145
Help on configuring features Help button on each page.
Host name for a device Configuration > Network > Advanced Network Settings > Host Name 82
Industrial Automation (IA) Configuration > Serial Ports > Select Port Profile > Industrial
Automation
The Industrial Automation port profile should address most configuration
scenarios. To fine-tune your IA settings, use the “set ia” command from the
command line. See the set ia command description in the Digi Connect
Family Command Reference.
For additional information on configuring Industrial Automation, see this
web site:
http://www.digi.com/support/ia
122
IP address settings Configuration > Network > IP Settings
Configuration > Network > Advanced Settings
46, 66, 82
IP filtering / access control Configuration > Network > IP Filtering Settings 77
IP forwarding: Network Address
Translation (NAT) and port
forwarding configuration/static routes
Configuration > Network > IP Forwarding Settings 78
Modem emulation Configuration > Serial Ports > Port Profile Settings >
Modem Emulation
See the Connect Family Command Reference for modem emulation
commands.
88
Feature/task Path to feature in the web interface See page