User`s guide

Troubleshooting
180
Digi Connect Wi-SP
Digi Connect Wi-SP has three LEDs: Wi-Fi Link and Wi-Fi Activity, which are connected directly
to the hardware; and the Power LED, which is software programmable.
Digi Connect Wi-SP - Back
Power
Connector
Antenna
Connector
(SMA)
Power
LED
POWER
9 to 30VDC
,37A-.11A
Act
Link
Wi-Fi
Link
LED
Wi-Fi
Activity
LED
LED/button Color and
Light Pattern
Description
Wi-Fi Link Status
LED
Solid green Unit is associated with an access point.
Green, blinking
slowly
Unit is in ad hoc mode.
Green, blinking
quickly
Unit is scanning for a network
Wi-Fi Activity
Status LED
Solid yellow Bad initialization
Off The Wi-Fi link is idle.
Blinking yellow Traffic is on the Wi-Fi link.
Power LED Red (labeled PWR) This LED is software programmable. The default is that this LED indicates power (and
is therefore always on).