User`s guide

Configure Digi devices
59
If using the Software and Documentation CD, follow these steps:
1 On the main page Software and Documentation CD, click software - install optional
software.
2 Select Device Discovery Utility and click Install.
3 Follow the prompts of the Setup Wizard to install the Digi Device Discovery Utility
software.
Discover devices
From the start menu, select Start > Programs > Digi Connect > Digi Device Discovery. The Digi
Device Discovery application is displayed.
Locate the device in the list of devices, and double-click it, or select the Digi device from the list
and select Open web interface in the Device Tasks list.
Depending on whether a system administrator has configured password authentication for the
device, a login may be required. If a login dialog is displayed, enter the user name and password
for the Digi device. The default username is root and the default password is dbps. If these defaults
do not work, contact the system administrator who initially set up the device. Now configure the
Digi device, as described on the following pages.