User`s manual

ManualsBrandsDigi ManualsComputer equipmentXPress

USER’S MANUAL

XPress

Ethernet

Bridge

NOTES:

.776

3.5992.047

.197 7.480

7.874

.197

.776

.956

5.961

.956

2.625 5.961 .636

9.222

.197

1.594

.591

2.382

SHEET 1 OF 1

PRO/ENGINEERSCALE NTS

DO NOT SCALE DRAWING

-9XPress

CODE ID

FINISH

REVPART NO.SIZE

12-9-09TJEENGINEER

9XPress Manual Drawing

12-9-09TJECHECKED

MATERIAL

TITLE

12-9-09TJEDRAWN

THIRD ANGLE PROJECTION

12-9-09TJEDESIGNED

DATEAPPROVALS

UNLESS OTHERWISE SPECIFIED ALL

DIMENSIONS ARE IN INCHES...

TOLERANCES ARE AS FOLLOWS:

.XX +/- .01

.XXX +/- .005 ANGLES +/- 2ı$

DATEAPPRCKDBYDESCRIPTION OF CHANGEECOREV

12-9-09TJETJETJE---

TOP VIEW

FRONT VIEW

THIS DOCUMENT CONTAINS INFORMATION

PROPRIETARY AND CONFIDENTIAL TO DIGI

INTERNATIONAL INC. BY ACCEPTING

DELIVERY, RECIPIENT AGREES TO RETAIN IT

IN CONFIDENCE AND NOT DISCLOSE IT TO

OTHERS NOR USE IT FOR ANY PURPOSE

OTHER THAN THAT FOR WHICH IT WAS

DELIVERED, AND TO PROMPTLY RETURN IT

UPON REQUEST.

Summary of content (8 pages)

PAGE 1
956 .776 2.047 3.599 .776 .197 .591 2.382 1.594 XPress Ethernet Bridge - .197 UNLESS OTHERWISE SPECIFIEDREV ALL DIMENSIONS ARE IN INCHES... TOLERANCES ARE AS FOLLOWS: .XX +/- .01 .XXX +/- .005 ANGLESı$+/- 2 ECO DESCRIPTION OF CHANGE APPROVALS THIRD ANGLE PROJECTION THIS DOCUMENT CONTAINS INFORMATION PROPRIETARY AND CONFIDENTIAL TO DIGI INTERNATIONAL INC.
PAGE 2
XPress Ethernet Bridge User’s Manual Thank you for your purchase of the XPress Ethernet Bridge. If you have any questions when configuring your Digi system, the best place to get answers is to visit http://www.digi.com/products/wireless/xpress.jsp. You will also find the latest updates there. If more assistance is needed, send email to rf-experts@digi.com or call technical support at the number below during normal business hours.
PAGE 3
User’s Manual XPress Ethernet Bridge Contents XEB09-CISA(-W): • • • • One XEB RF Modem (“-W” = International variant) One 2.1 dBi Weatherproof Dipole Antenna One 12 VDC Power Supply One Power over Ethernet Injector XEB09-CIPA(-W): • Two each of the items above (Ethernet cables are not included.) Operational Summary The XPress Ethernet Bridge allows the user to create a long-range, wireless Ethernet network with up to 16 active (63 total) subscriber units per access point.
PAGE 4
XPress Ethernet Bridge User’s Manual Physical Dimensions Unscrew the weatherproof cap to find an RJ-45 connector inside. A standard RJ-45 cable can be used if weatherproof installation is not required. 7.874 .956 (4X) .956 5.961 .166 .776 2.047 3.599 RJ-45 Connector Pinout .776 .197 7.480 .197 TOP VIEW "INCHES" 9.222 2.625 5.961 .636 .591 2.414 1.626 FRONT VIEW "INCHES" .197 UNLESS OTHER DIMENSIONS A TOLERANCES A .XX +/- .01 .XXX +/- .
PAGE 5
User’s Manual XPress Ethernet Bridge Setup 1. Consult IT - each XPress radio comes default with a static IP address of 192.168.17.17. We recommend connecting each radio to a stand-alone computer disconnected from any shared network, and consulting with your IT dept before connecting them to any shared network. 2.
PAGE 6
XPress Ethernet Bridge User’s Manual The information on the left is the current status of the radio, while the boxes on the right allow you to change it. It is important that the IP address of the XPress is in the same subnet as your computer. For example, if the subnet mask is 255.255.255.0 (a class C network), the first three number groups of the IP address must match. Choose your desired parameters and click “Apply.” 5. Make note of the chosen IP address and password, then click “Go to Device Web Page.
PAGE 7
User’s Manual XPress Ethernet Bridge If you scroll down in the Admin browser page, you will come to three more sections: • A graphical spectrum analyzer display that may help you to select radio channels that avoid interference • A section to be used if an update to the XPress firmware is required.
PAGE 8
XPress Ethernet Bridge User’s Manual 9. When all of the radios are keyed and operating, connect them to your network and Ethernet devices as desired and cycle the radio’s power to begin normal operation. Now, browser mamagement of the SUs can be performed over the wireless network. Note: avoid plugging actively linked radios into the same switch because this will corrupt its routing table and may cause network problems just as if you had plugged a CAT5 cable directly between two ports of a switch.