User's Manual

Digianswer Bluetooth Protocol Analyser Installation & Operation Manual
15
Opening a file
This function – Load Log session from file – will open a
dialog box that allows you to browse and open a log file.
The Protocol Analyser features especially fast load of files of
sizes up to the available physical and virtual memory
limitations. Files exceeding that size will be loaded less fast.
Filter setup
The filter function allows you to reduce the amount of data
displayed in the list view. In Baseband, for instance, you can
choose to view only LMP and L2CAP packets, rather than all
the packets transmitted. This function can greatly reduce the
number of packets on a list, making the list much easier to
work with.
The filter function needs to be selected for each of the lists –
Baseband, LMP, L2CAP, RFCOMM, or SDP; applying the
function to one of these lists will not affect the others.
In the Filter Setup dialog box, you can select which list of
packets the filter function should be applied to, and which data
should be filtered. The choice of data varies depending on
which list of packets is selected. The following example shows
the dialog box as it appears when selected from Baseband:
Although Baseband is, in principle, a list of all the packets
logged in the current log file, these are filtered by default so
that only LMP and L2CAP packets are shown in Baseband.
However, you can change the settings as your desire.