User's Manual
Digianswer Bluetooth Protocol Analyser Installation & Operation Manual
21
[08] Estimated clock (27-24) Piconet master clock
[09] Estimated clock (23-16) -
[10] Estimated clock (15-8) -
[11] Estimated clock (7-0) -
[12] Hop frequency The frequency offset âkâ used for this packet
F = (2402 + k) MHz
[13] Header info:
AM address (bit 2-0)
If packet type is ID or IQ, this parameter is not valid
[14] Header info:
Type (bit 3-0)
If packet type is ID: 255
[15] Header info:
FLOW (bit 0)
If packet type is ID or IQ, this parameter is not valid
[16] Header info:
ARQN (bit 0)
-
[17] Header info:
SEQN (bit 0)
-
[18] Payload info:
L_CH (bit 1-0)
If packet type is ID, IQ, NULL, POLL, HV1, HV2, HV3 or FHS, this parameter is not valid
[19] Payload info:
FLOW (bit 0)
-
[20] Payload info:
Length (bit 8)
-
[21] Payload info:
Length (bit 7-0)
-
[22] 1st payload data byte Tx/Rx payload data bytes. Note that Tx data bytes are bit-reversed
[23] 2nd payload data byte -
... ... -
... ... -
... ... -
[359] 338th payload data byte -