User's Manual

Digianswer Bluetooth Protocol Analyser Installation & Operation Manual

The installation procedure includes installing hardware,

drivers, and software applications for the Bluetooth Protocol

Analyser. In addition, Digianswer’s Bluetooth Software Suite

will be installed.

Note: If the Digianswer Bluetooth Demo Card or a

previous version of the Bluetooth Software Suite is

installed on your computer, you must uninstall this before

you can install the Bluetooth Protocol Analyser. See the

subsection “Uninstalling old programs” below.

Installing hardware and drivers

To install the Bluetooth Protocol Analyser hardware and the

drivers for it:

1. Insert the Bluetooth Protocol Analyser CD-ROM.

2. Plug the USB cable of the Bluetooth Protocol Analyser into

an available USB port on the computer. Windows now

finds the new hardware and asks for drivers.

3. Follow the on-screen steps to complete the installation

of the drivers, which are located on the CD-ROM at

D:\Drivers (where D: is your CD-ROM drive).

Note: When you have installed the drivers, Windows will

ask if you want to restart your computer. However, it is not

necessary to restart the computer before installing the

application software.

Note: When you have installed the drivers, your computer

may appear frozen for some 30 seconds.

Note: Do not remove the Bluetooth Protocol Analyser CD-

ROM from your computer until you have installed the

application software.