User's Manual

Digianswer Bluetooth Protocol Analyser Installation & Operation Manual

Installing application software

Having connected the Bluetooth USB Protocol Analyser and

installed the drivers, your are now ready to install the

application software for the Bluetooth Protocol Analyser: the

Data Collector and the Bluetooth Packet Analyser. At the same

time you will be installing Digianswer’s Bluetooth Software

Suite.

1. Run D:\Setup.exe (where D: is your CD-ROM drive,

where the Bluetooth Protocol Analyser CD-ROM is

present).

2. Follow the on-screen instructions to complete the

installation of the application software.

3. Restart your computer.

You are now ready to operate your Bluetooth Protocol

Analyser.

Uninstalling old programs

If the Digianswer Bluetooth Demo Card or a previous version

of the Bluetooth Software Suite is installed on your computer,

you must uninstall this before you can install the Bluetooth

Protocol Analyser.

To uninstall the Bluetooth Demo Card:

1. Insert the Demo Card.

2. Insert the Bluetooth Protocol Analyser CD-ROM.

3. Run D:\deinstaller.exe (where D: is your CD-ROM drive).

4. Follow the on-screen instructions.

5. Remove the Demo Card.

6. Restart your computer.

To uninstall the Bluetooth Software Suite:

To uninstall the application software:

1. From the Start menu, find and select Uninstall /

Digianswer Bluetooth Software Suite.

2. Follow the on-screen instructions.

3. Restart your computer.