User guide

SD10 - Getting Started

1-17

For Input channels, note that if the channel input signal is changed once a channel has been manually

named, the channel name will no longer follow the input signal name. To reactivate the automatic channel

naming function, clear the name and re-select the channel input.

Note also that the channel Output display also provides access to this channel naming facility.

Channels can also be named directly in the Channel List display (in the Layout menu). Open the display, activate the Edit

function below the list, and expand the required channel type list by touching its row. Touching the channel name column for

any channel in the list will cause a keyboard pop-up to appear, where a name can be typed in the usual way.

1.9 Channel Processing

1.9.1 EQ ..........................................................................................

On input channels, the EQ section comprises four user-configurable parametric filters and a pair of swept High-pass and Low-

pass filters. On output channels, there are eight bands of EQ and no filters.

The EQ is accessed by touching the on screen display to Assign the channel (the colour changes to yellow) and then using

the controls on the right hand side of the screen.

When a control is adjusted the expanded view seen below appears in the input screen but this view can be seen at any time by

touching the EQ response graph on the screen.

Note - If the expanded view does not appear when a control is adjusted open the Options panel and set the

Auto Expand EQ option to Yes

Touching the normal EQ response graph will show an expanded view in a separate panel.

The order of EQ and Dynamics in the channel signal path can be changed using the worksurface button to the right of the

worksurface HPF and LPF controls.

EQ Presets Copy EQ Settings

EQ Type

HPF/LPF

4 Bands

Dynamic E

The type of filter used by the top and bottom bands can be changed by successive presses of the Curve button for that band.

Dynamics are available to each EQ band – dynamic EQ modules can be assigned to a maximum of 16 channels. Clicking on the

'delta' EQ button below the band's gain control will open up its Dynamic EQ display: