Owner's manual

SD7 - Getting Started

1-15

1.6 Saving and Loading Sessions

1.6.1 Save As New File .................................................................

When you change the configuration of a session you should save it to the console's flash drive under a new filename.

If the Save Session panel has not appeared automatically after a session restructure then touch the Files button on the Master

screen and then press Save As New File.

Select the destination drive (Internal or Removable) and file path and then enter a new file name and description for the file - then

press the Save button.

Note: If you touch a session name on the existing list, this name will automatically be selected as the new file

name and touching Save will overwrite the old file.

Enter a Filename

Enter a Description

nternal files saved

in D:\Projects

Select Internal or

Removable USB

To create a new folder

in D:\Projects

Note that column widths can be adjusted by dragging their borders within the title row. To return all col-

umns to their default widths, press RESET WIDTHS, in the top left-hand corner of the window.

1.6.2 Save Session ........................................................................

This button which is found above the Save As New File button will save the existing session in the same location and under the

same file name as it was previously saved or loaded from. It therefore serves as a "Quick Save" option to update an existing

session.

Remember that this function will overwrite your last saved version.

If you wish to save the session under a new name use the Files menu button and select Save As New File (See above).

1.6.3 Load Session ........................................................................

To load a previously saved session:

Touch the Files button on the Master screen and then press Load Session.

Select the source drive (Internal or Removable) and the required file from the list - then press the Load button.

Select a File

File Details

nternal files saved

in D:\Projects

Select Internal or

Removable USB

Press Loa