Owner's manual

SD7 - Getting Started

1-19

1.9 Channel Processing

1.9.1 Dynamic EQ...........................................................................

The EQ section comprises four user-configurable parametric filters with Dynamic Control and a pair of swept High-pass and Low-

pass filters.

The EQ is accessed by touching the on screen display to Assign the channel (the colour changes to yellow) and then using

the controls on the right hand side of the input module.

When a control is adjusted the expanded view seen below appears on the screen. This view can be seen at any time by touching

the EQ response graph on the screen.

NOTE: If the expanded view does not appear when a control is adjusted open the Options panel and set the

Auto Expand EQ option to Yes

Each band's response can have one of two characters – precision and classic. These can be switched for all bands using the

precision and classic buttons, or on individual bands using the 2nd function of the bell/hishelf buttons.

To access the Dynamic control, touch the left arrow symbol on any EQ band.

Touching the normal EQ response graph will show an expanded view in a separate panel.

The order of EQ and Dynamics in the channel signal path can be changed using the worksurface button at the bottom of the EQ

section.

Order of EQ

and Dyamics

EQ Presets

HPF/LPF

4 Bands

Dynamic E

Controls

Note: The four band EQ and each of the filters have their own in/out switches.

The type of filter used by each band can be changed by successive presses of the Curve button for that band.