Owner's manual

SD7 - Getting Started
1-21
1.9.3 Auxiliaries .............................................................................
The auxiliaries can be accessed by touching the auxiliary row on screen or using the Screen Scroll buttons on the left of the
worksurface
Using either of these methods, the highlighted auxiliaries on the input screen will change. The rotary controls and switches
beneath the screen are used as auxiliary sends, pans (with 2nd Function ON), On/Off and pre/post switches (with 2nd Function
ON).
There are also 4 dedicated encoders and switches on the right of the worksurface that can be assigned to 4 auxiliary sends per
channel. The assignment can be scrolled up or down in steps of 4.
Assigned
C
ontrol LCD
H
old & touch screen
to Assign
A
ssignable Aux Send Contro
ls
Touch screen to select
Dedicated Aux Send Controls
and WorksurfaceScroll buttons
It is also possible to show all of the aux sends for a channel in a single display and assign them to the 36 rotaries beneath the
screen. This is done by assigning the required channel to the aux controls (the assigned auxes will be displayed in dark purple
with a dark purple surround) then touching one of the assigned auxes. The layout of the display indicates which encoder each
aux is assigned to; if there are more that 36 sends, the assignments becomes scrollable using the Screen Scroll function.
Once you have adjusted the auxes in this display, you need to close it manually before opening any other channel detail display.