Installation guide
Digi TransPort
®
WR11 Installation Guide
Page 12
Verizon Provisioning
For a Verizon device, press the Start button under CDMA Provisioning (Conguration - Networks > Interface
> Mobile) leaving the elds blank as shown in the following image.
Verizon LTE Conguration
If using a Verizon LTE module (WR11-L800 or WR11-L900) and a standard Verizon LTE SIM, the device will
connect by default. If using a custom SIM, regardless of module type, select Use custom APN instead of built-in
APN under the Mobile Service Provider Settings, and enter the apn name (as an example, your.apn.com).
Sprint Provisioning
A Sprint device will automatically start the provisioning process when you power the device on. This process
may take several minutes to complete. If it has sufcient cellular signal strength, a successfully provisioned
device will obtain a mobile phone number, as shown in the following image.