VoiceGATE Door Alarm Model 8D5499 User's Manual

Digicom S.p.A.
VoiceGATE
Manual rev.2.0
Pag. 17
Private Network Configuration
The information concerning the reading and the LAN part parameters are displayed in this window:
<-----
Attention:
do not insert an IP
address of the same network
used in the WAN configuration
“PublicNetwork
Configuration”. If the WAN
address is 192.168.2.1 you
cannot use addresses
192.168.2.x.
Enable DHCP Server:
Enables/Disables the DHCP Server functionality to the LAN
IP Address: Device IP Address – LAN side
Subnet Mask:
Device Network Subnet Mask
Address Pool List: List of IP addresses to be assigned to the devices connected on
the LAN side. (This features is on only if the DHCP server is
enabled)
IP Address Pool Mask: Network Mask of the addresses to be assigned to the LAN side.
Router List: Default Gateway for the LAN side
Dns List:
List of active Domain Name Server
Domain Name:
Domain name
Leased Time:
Validity time for the IP address assigned to the devices
connected to the LAN side (valid only if the device is configured
as a DHCP server)
NAT: Enables/Disables the NAT protocol