Datasheet

NETWORKING - ETHERNET CARDS
For further information: [e-mail] or http://www.digicom.it
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. All other brands, products and trademarks are property of their respective o
wners.
 32bit PCI Bus Ethernet card
 RJ45 STP port (Shielded Twisted Pair)
 10M/100M/1Gigabps in Autosensing
 Automatic MDI/MDI-X function
 Full-duplex and Half-duplex mode
 Complies with PCI 2.1 and 2.2 32bit
specifications
 Wake On Lan support
 802.1Q WLAN TAG support
 Plug & Play automatic configuration
 Complies with following specifications:
IEEE 802.3ab, 1000Base-T, IEEE 802.3u
100Base-TX, IEEE 802.3 10BASE-T, IEEE
802.3x
 Connection status and speed led
indicators
 Low consumption operation
 Plug & Play
 Drivers for Windows® XP, ME, 2000, 98,
NT4, Novell Netware 5.x and 6.x, Linux
Kernel 2.2.x and 2.4.x
 CE mark
PCI LAN Giga 32 03.02.2005
DESCRIPTION
Connect your server or PC at 1 Gigabps without
using the expensive fiber optics?
The most performing and advantageous solution
is now available!
The Ethernet card at 1 Gigabps on copper for PCI
Bus at 32bit.
PCI LAN Giga 32: the maximum performances for
speed and advanced functionalities on the standard
UTP cabling in Category 5.
Ideal for high performances servers or users that
require very high speed.
The PCI 32 bit bus-mastering technology and the full-
duplex feature allow to reach the speed of 2Gbit/s.
Speed and operating mode are automatically detected
and selected.
PCI LAN Giga 32 is built also to reduce the energy
consumption, in fact, when not in use, it reduces the
consumption following the APCI Power Management
recent specifications.
Plug & Play, PCI LAN Giga 32 is supplied with the
drivers for these operating systems: Windows® XP,
ME, 2000, 98, NT4, Novell Netware 5.x and 6.x, Linux
Kernel 2.2.x and 2.4.x.
PCI LAN Giga 32
Code: 8E4191
Server
PCI Lan Giga32
Dual Speed Switch 8G
PC
PC
1 Giga