User guide

Workstation Card Rev 1.2 Important notes
Genex Research Limited Page 1
Important notes
Unpacking
After unpacking the Workstation Card, save all the packing materials in case you ever need to
ship the unit. Thoroughly inspect the card for signs of damage. Report any shipment damage
to the carrier at once. The following accessories are included with the card:-
1. User Guide.
Installation
• The Genex Workstation Card is installed into either of the two slots found on the back of
the Genex GXA8 A/D converter or the Genex GXD8 D/A converter. The card should only
be inserted or removed when the main unit is switched off.
Technical Support
Technical Support is available on line through the Genex web site at:-
• http://www.genex.co.uk/
or by emailing:-
• [e-mail].