User`s guide

Chapter 2: Connecting Your Studio 9
you wish to record a full 16 channels of au-
dio from ADAT, Channel 1-2 input must be
set to ADAT for both Group A and Group B.
4. Sample Rate
These LEDs indicate the current sample
rate of Group A and Group B of the ADAT
Bridge I/O. If these LEDs are flashing, it in-
dicates that the currently selected sample
rate does not match the sample rate cur-
rently being received by the ADAT Bridge
I/O.
5. Digital Format
These LEDs indicate which digital port
(AES/EBU or S/PDIF) is currently being used
for digital input on channels 1-2 of Group
A or Group B.