User`s guide

Chapter 1: Introducing the Digidesign ADAT Bridge I/O 3
The following symbols are used to high-
light important information:
✽
User Tips are helpful hints for getting the
most from your system.
▲ Important Notices include information that
could affect your session data or the perfor-
mance of your system.
☞ Cross References point to related sections
in other Digidesign Guides.
System Requirements
The Digidesign ADAT Bridge I/O requires:
• A Pro Tools 24 MIX or MIXplus, Pro Tools
24 or Pro Tools III system, on an appro-
priate CPU (Mac OS or Windows NT).
• Version 4.3 or higher of the Pro Tools
software
and it’s associated versions of
DAE and the DigiSystem INIT.
• An external mixing console and moni-
toring system (amplifier, speakers, head-
phones, etc.).
• One or more ADAT or ADAT-compatible
devices.
ADAT Firmware Requirements
In order to ensure that your ADAT is fully
compatible with the ADAT Bridge I/O, we
recommend that it have the firmware ver-
sion given below. If you are not sure of the
firmware version of your ADAT or ADAT-
compatible recorder, please contact the
manufacturer or your professional audio
dealer.
• The original ADAT should be equipped
with firmware version 4.03 or higher.
• The ADAT XT should be equipped with
firmware version 1.04 or higher.
• The ADAT M-20 should be equipped
with firmware version 1.0 or higher.
• The ADAT XT20 should be equipped
with firmware version 2.0 or higher.
• The ADAT LX20 should be equipped
with firmware version 2.0 or higher.