Specifications

Chapter 5: DigiRack Real-Time TDM and RTAS Plug-Ins 45
Band Gain Control
Each Peak and Shelf EQ band has a Gain control
for boosting or cutting the corresponding fre-
quencies. Gain controls are not used on High-
Pass, Low-Pass, or Notch filters.
Frequency Control
Each EQ band has a Frequency control that sets
the center frequency (Peak, Shelf and Notch
EQs) or the cutoff frequency (High-Pass and
Low-Pass filters) for that band.
Q Control
Peak and Notch On Peak and Notch bands, the
Q control changes the width of the EQ band.
Higher Q values represent narrower band-
widths. Lower Q values represent wider band-
widths.
Shelf On Shelf bands, the Q control changes the
Q of the shelving filter. Higher Q values repre-
sent steeper shelving curves. Lower Q values
represent broader shelving curves.
Band Pass On High-Pass and Low-Pass bands,
the Q control lets you select from any of the fol-
lowing Slope values: 6 dB, 12 dB, 18 dB, or
24 dB per octave.