User guide

Pro Tools|HD Native User Guide22
Prefs Button
The Prefs button opens the CoreAudio Manager
Preferences dialog for the Manager application.
There are several options available for control
and configuration of the Manager application.
When finished setting these options, click OK to
close the CoreAudio Manager Preferences win-
dows.
Hide Manager if Auto-Launched by Client Enable
this option to hide the Manager panel after the
first client application accesses the CoreAudio
Driver. To open the Manager panel, click on the
CoreAudio Manager application icon in the
Dock.
Auto-Quit Manager when Last Client Quits En-
able this option to make the Manager applica-
tion quit when there are no longer any clients
using the CoreAudio Driver.
Use C|24 Stereo Routing (L/R to 1/3) When
using C|24, enable this option to configure the
CoreAudio Driver to output through the C|24
standard stereo routing (outputs 1 and 3).
Use XMON Stereo Routing (L/R to 1/5) When
using D-Control or D-Command, enable this
option to configure the CoreAudio Driver to
output through the D-Control or D-Command
standard stereo routing (outputs 1 and 5).
Mirror Analog Outs 1 & 2 to Digital Outs (003, 003
Rack, 003 Rack+, Digi 002, or Digi 002 Rack
Only) When using 003, 003 Rack, 003 Rack+,
Digi 002, or Digi 002 Rack, enable this option to
mirror the main outputs through the digital out-
puts that are selected in the Hardware Setup di-
alog. (This option is grayed out for Pro Tools|HD
systems.)
Connect Button
The Connect button is available when the Core-
Audio Manager is launched and cannot connect
with the Pro Tools hardware (such as when
Pro Tools is launched and the hardware is dis-
connected or disabled). Before trying to con-
nect, make sure to quit Pro Tools and make sure
that your hardware is connected and turned on.
You can then click on the Connect button to ac-
quire the hardware.
Quit Button
Use the Quit button to quit the CoreAudio Man-
ger. Be sure to quit any client applications before
using the Quit button in the Manager. If any ap-
plications are currently attached to the Manager
application when quitting, you may get an error
message indicating that the Pro Tools hardware
is no longer available. You may have to change
the application’s preferences to use different
hardware for playback or possibly quit and re-
launch the application for proper playback to be
resumed.
CoreAudio Manager Preferences
If any application is launched prior to press-
ing the Connect button and you want that
application to use the CoreAudio Driver for
playback, you will need to quit and re-
launch the application for it to connect
properly to the CoreAudio Manager.