Setup guide

Welcome to Pro Tools LE 13
Record Yourself
This section shows how to connect a microphone and record yourself singing or playing an in-
strument.
Connect a Mic
To hook up a microphone:
1 Plug a mic into the Input 1 Mic or Line/DI jack on the back panel:
• If your mic has an XLR cable use the Mic input.
• If it has a 1/4-inch cable, use the Input 1 Line/DI input.
2 On the back panel, set the Mic/DI switch in or out, depending on your connection:
• If you’re using XLR, press the Mic/DI switch so that it’s “out” (Mic position).
• If you’re using the DI input, press the Mic/DI switch so that it’s “in” (DI position).
Connecting a mic to Input 1 with an XLR cable (left) or a 1/4-inch cable (right)
Your Mbox 2 Mini has two input channels, labeled Input 1 and Input 2. Input 1
provides two jacks (one XLR and one 1/4-inch) while Input 2 provides a single 1/4-inch jack.
You can connect things to both of the Input 1 jacks simultaneously, but only one of those will
be active (as set by the Mic/DI switch).
For an audio hookup diagram of your Mbox 2 Mini, see the back of the Quick Setup instruc-
tions that came with your device.
Mic/DI
switch
- Or -
Mic/DI
switch
out
in