Setup guide

Welcome to Pro Tools LE 17
5 In the toolbar (or in the Transport window) click the Return to Zero button to jump back
to the start of the session, then click the Record button. This tells Pro Tools that you’re happy
with your levels and are ready to record (think of this as a “master” record enable button).
6 Choose Window > Edit so you can watch what happens when you record.
7 When you are ready to start recording, click Play or press the Spacebar. To stop, press the
Spacebar or click Stop. Here’s what Pro Tools looks like while it’s recording a track.
Listen to Your Work
To play back a recorded track:
1 Click the track’s Record Enable button again to take it out of Record mode.
2 On the front of the Mbox 2 Mini, turn the Mix control fully to the right.
3 Click Play in the Transport window or press the Spacebar to start playback.
4 When you want to stop, press the Spacebar or click Stop.
Recording a vocal track
If you want to use a click track/metronome, see the “Using a Click (Metronome)” section on
Page 20.
RecordPlayReturn to Zero