Specifications

Chapter 7: Plug-in Controls 69
EQ Edit and Display Controls
Automation Switch
The Automation switch lets you enable EQ parameters for au-
tomation by touching or pressing their controls in the EQ sec-
tion only.
In Automation mode, the Auto switch is lit. While in this
mode, the Auto indicator for any rotary encoder enabled for
automation is lit red, and the switch for any parameter en-
abled for automation is lit.
To toggle automation on and off for individual EQ parameters:
1 Press the Automation switch.
2 Touch the rotary encoders or press the switches in the EQ
section for which you want to toggle automation.
3 Press the Automation switch again to exit Automation
mode.
To toggle automation on and off for all parameters of an EQ
plug-in:
1 Press the Automation switch.
2 Do one of the following:
• Hold Alt (Windows) or Option (Mac).
– or –
• Hold Do to All.
3 Touch any rotary encoder or press any switches in the EQ
section.
4 Press the Automation switch again to exit Automation
mode.
Automation Safe Switch
The Automation Safe switch toggles the Safe button in the
plug-in window, which protects existing automation for that
plug-in from being overwritten.
Compare Switch
The Compare switch toggles the Compare button in the
plug-in window, which alternates between the currently saved
plug-in setting and any changes you have made.
Window Switch
The Window switch is used to open and close the on-screen
window for the currently focused plug-in.
Output Meter and Clip Indicator
The Output meter shows the output levels for the current
plug-in. The Clip indicator lights when a clip is reported by
the plug-in, and can be cleared by pressing the Clear Clip
switch in the Session Management section.
Cycle Switch
The Cycle switch steps through all available EQ plug-ins on
the focused channel.
Bypass Switch
The Bypass switch bypasses the plug-in.
Page Switch
The Page switch steps through the pages for the currently dis-
played plug-in. The Page switch lights when plug-ins have
more than one page of controls. Active controls are shown in
the on-screen plug-in window by colored outlines.
Edit and Display controls in the EQ section
Cycle switch
Bypass switch
Automation switch
Automation Safe switch
Page switch
Compare switch
Window switch
Clip indicator
Output meter