Specifications

Chapter 4: Synchronic Controls 35
Playback Presets
Twelve Playback presets let you recall stored ef-
fects. Selecting a preset recalls the last edited set
of parameters for the preset. Effect presets let
you invoke different effects in rapid succession,
to create a compelling musical performance.
Effect User Knobs (FX1 and FX2)
The Effect module provides two assignable User
Knob controls (FX1 and FX2) that provide direct
control over any of the Effect modules Edit
mode settings. The current control assignment
is displayed below each User Knob.
Effect Edit Mode
In Edit mode, the Effect module provides easy
access to the Gain, Noise, Filter, and Delay ef-
fects and their parameters.
Enabling an Effect
Enabling an effect processes the sound (A/B
Sounds) coming from the Playback module. Dis-
abling an effect essentially bypasses the effect.
To enable or disable the Gain, Noise, Filter, or
Delay effect:
 Click the Effect Enable button above the Ef-
fect Select button. The button is illuminated
when the effect is enabled.
Selecting an Effect for Editing
To view the Gain, Noise, Filter, or Delay effect
parameters:
 Click the Effect Select button (Gain, Noise, Fil-
ter, or Delay). The selected effect’s button will il-
luminate, and the effect’s parameters will be
available for editing.
Gain Effect
Gain is used to add Volume, Distortion, or Satu-
ration to the sound (A/B Sounds) coming from
the Playback module. Similar to the Playback
section, the Range controls set Beginning and
End values. Range settings can also be modu-
lated by an LFO to create dynamic gain effects.
BED and END Range (–96 to 24 dB) Use the BEG
and END parameters to set the amount of Gain
effect. The specified Range settings control the
amount of modulation by LFO1 and LFO2.
Effect module, Edit mode (Gain shown)
A/B Sound
selectors
Performance/Edit
Mode toggle
Preset selector
Effect Enable and
Select buttons
Selected Effect
parameters
User Knob
assignments
Gain effect
Gain Enable
Gain Select
button
LFO Waveshape
selectors
Beginning Gain
amount (in dB)
End Gain
amount (in dB)
LFO Duration
selectors
button
Gain Mode