Specifications

Video Satellite LE Guide8
Configuring the main Pro Tools HD
System as an Administrator
To configure the main Pro Tools HD system as an
administrator:
1 On the Pro Tools|HD system, choose Setup >
Peripherals and click Satellites.
2 In the System Name text box, enter a name for
the system.
3 Under Mode, choose Administrator.
4 Under Administrator, choose the current sys-
tem from the one of the system pop-up menus.
5 Click OK.
Configuring the Video Satellite LE
System
To set up the Video Satellite LE system:
1 On the Pro Tools LE system, choose Setup > Pe-
ripherals and click Satellites.
2 In the System Name text box, enter a name for
the system.
3 Under Mode, choose Enable Satellite Mode.
4 Click OK.
Declaring The Video Satellite LE
System
When the Video Satellite LE system has been
been configured as a satellite, it becomes avail-
able on the administrator system. The satellite
system is then declared to connect it to the
Pro Tools|HD system.
To declare the satellite system on the
administrator system:
1 On the Pro Tools|HD administrator system,
choose Setup > Peripherals and click Satellites.
2 Under Administrator, declare the system you
want to use as a satellite from the System 2–5
pop-up menus.
3 Click OK.
The systems appear, in order, from left to right,
in the Synchronization section of the Transport
window.
Configuring a satellite in the Satellites page of the
Peripherals dialog
Configuring a Video Satellite LE system in the Satellites
page of the Peripherals dialog
Only one Video Satellite LE system can be
connected to a Pro Tools|HD system at a
time.