User guide

21
It is advisable to slightly increase the duration of the programme to allow for minor changes to the schedule. This can
be achieved by altering the start and end times of each recording.
To return to watching TV:
■ Press Menu to select a sub-menu at the bottom of the screen
■ Use

to highlight Guide and press to display TV listing information.
■ Use ▲▼ to highlight the desired TV channel and press to view.
Recording Conflict
The DVR can record any two channels simultaneously. If you have scheduled two recordings at the same time, you can
either watch one of these channels or playback a previous recording from the ‘Library’.
If you attempt to view another channel whilst recording two channels, you will be presented with the following options:
■ Press Red to go to Guide to view either of the channels currently being recorded
■ Press Green to go to Record List to cancel a current recording – once you have stopped a recording you
■ will then be able to view any other channel
■ Press Yellow to go to Library to watch a recorded programme stored on the hard disk
Using the DVR
20
Playback Recorded Programmes
All recorded programmes are listed in the on screen Library.
■ Press Library on your remote to display a list of recorded programmes, with the most recent recording appearing first.
■ Use ▲▼ to scroll through the list to view all recordings.
When the programme title is highlighted, snapshot images are displayed below that index the recording into 5
minute intervals or scenes for quick and easy navigation - the scene number and duration into each
programme are also indicated.
■ To play a recorded programme from the beginning, use ▲▼ to highlight the programme and press
■ To play a recorded programme from a specific scene as displayed, use

to highlight and press
Create New Scenes
Add new scenes during the playback of a recording to create further indexing for more accurate navigation e.g. to easily omit
the viewing of unwanted programming.
■ During playback, press at the precise point where you want the scene to begin
■ Press Green to confirm you want to add the new scene.
The new scene will be displayed when you next enter Library.
To delete a particular scene, ensure the programme is highlighted, use

to highlight and press Yellow.
Deleting scenes does not delete any part of the programme, only the snapshot image displayed in Library.
Using the DVR