User Manual

EtherSound ES881, ES1241 & ES16161
Ethernet Audio Bridges
15
Selct sampling frequency
This jumper allows for modification of theES881, ES1241, and ES16161 sampling frequency. The default
value is preset to 48 kHz. It can be set to 44.1 kHz. Note that this setting is effective only if the ES881 is the
Primary Master of the EtherSound network, as the Primary Master is the device providing the clock for the
entire network. In case the EtherSound bridge acts as “common” Master or Slave device, the sampling
frequency is determined by the incoming EtherSound stream (synchronized on the Primary Master clock).
Modifications on devices other than the Primary Master will be ignored.