User's Manual
Table Of Contents
- AUDIO CHANNEL
- DAISY CHAIN
- dBV, dBu
- Two different units expressing the voltage level using logar
- FRAME
- GPIO
- MASTER
- PRIMARY MASTER
- SLAVE
- STAR
- SWITCH
- CANAL AUDIO (AUDIO CHANNEL)
- COMMUTATEUR (SWITCH)
- DAISY CHAIN (branchement en série)
- dBV, dBu
- Deux unités différentes exprimant un niveau de tension en ut
- GPIO (entrées/sorties Tout Ou Rien)
- MASTER
- PRIMARY MASTER
- SLAVE
- SSI
- STAR (étoile)
EtherSound ES8in, ES8mic & ES8out
Ethernet Audio Bridges
ES8mic & ES8micCL management
The ES8mic & ES8micCL management requires connection to a PC and Digigram's EScontrol software. For
further information, please refer to the EScontrol online help.
Remote set-up by means of configuration software
To prepare the device for remote control mode, set the rotary switches manually to either zero or to any
number between 65 and 99. Use of the configuration software allows for advanced channel allocation; for
software details, please refer to the online help file.
ES8in/ES8mic is shipped with a CD-ROM containing it’s the driver and EScontrol, the Digigram configuration
software. Insert the CD into a computer connected to an EtherSound network. Install the EtherSound driver
first. A window lists the instructions to follow to achieve this step.
Next, launch EScontrol setup.exe. An InstallShield Wizard will guide you through the installation process.
(Note: This operation is only necessary if software control is needed).
ES8in/ES8mic and ES8out may also be managed through configuration software edited by Digigram
development partners.
To uninstall the software go to Add/remove programs in the Windows Control Panel.
Firmware update
Digigram may decide in the context of further development to provide firmware updates for existing devices.
In this case, please refer to the respective documentation provided with the firmware upgrade tool.
11