User Manual
Table Of Contents
D i g i g r a m
12
Play file to play in loop a file of your choice (PCM only).
If the playback is correct, the card is correctly installed
and works.
• To stop the playback, right click on the card icon, and
select Stop Activities.
• If the card is not displayed:
• Make sure that during the HR runtime installation the
“Driver for the HR boards” has been selected in the
“Select components” window.
• Make sure that the card is correctly inserted in the PCI
slot, and screwed on the PC chassis.
• If necessary, uninstall the HR runtime package as
described in this manual, and re-install it.
• If the Wave driver has been installed:
• Go to menu <Start>, <Settings>, <Control panel>,
<Sound and Multimedia>, tab “Audio”, Default device
(Playback device, Recording device). The card’s channels
can be selected. The card can be used with any Wave
application.
Available Wave recording and playback devices are:
• PCX1221 (PCX1222) 1+2 (Wave) (record and playback)
• PCX1221 (PCX1222) 3+4 (Wave) (playback)
• PCX1221 (PCX1222) 5+6 (Wave) (playback)
• PCX1221 (PCX1222) 7+8 (Wave) (playback)
• PCX1221 (PCX1222) 9+10 (Wave) (playback)
• PCX1221 (PCX1222) 11+12 (Wave) (playback)
• PCX1221 (PCX1222) 5.1A (Wave) (playback)
• PCX1221 (PCX1222) 5.1B (Wave) (playback)
• PCX1221 (PCX1222) 7.1 (Wave) (playback)
• PCX1221 (PCX1222) 5.1+2 (Wave) (playback)
• PCX1221 (PCX1222) 7.1+2 (Wave) (playback)
• If the ASIO driver has been installed:
• The card is visible from any ASIO application.
Note:
5.1A plays on outputs 1, 2, 3, 4, 5, 6
5.1B plays on outputs 7, 8, 9, 10, 11, 12
7.1 plays on outputs 1, 2, 3, 4, 5, 6, 7, 8
5.1+2 plays on outputs 1, 2, 3, 4, 5, 6, 7, 8
7.1+2 plays on outputs 1, 2, 3, 4, 5, 6, 7, 8, 9, 10