User Manual

VX222e & VX222e-Mic
User’s Manual
13
• If the card you have installed is listed:
• Right click on the icon of the card.
• Select ‘Diagnostics’, and Play Sine. This plays in loop a
sine signal on the outputs of the card. You can also select
Play file to play in loop a file of your choice (PCM only).
If the playback is correct, the card is correctly installed
and works.
• To stop the playback, right click on the card icon, and
select Stop Activities.
• If the card is not displayed:
• Make sure that during the HR runtime installation the
“Driver for the HR boards” has been selected in the
“Select components” window.
• Make sure that the card is correctly inserted in the PCI
slot, and screwed on the PC chassis.
• If necessary, uninstall the HR runtime package as
described in this manual, and re-install it.
• If the Wave driver has been installed
∗
:
• Go to menu <Start>, <Settings>, <Control panel>,
<Sound and Multimedia>, tab “Audio”, Default device
(Playback device, Recording device). The card’s channels
can be selected. The card can be used with any Wave
application.
• If the ASIO driver has been installed:
• The card is visible from any ASIO application.
∗
Windows XP and Server 2003 only; for Windows Vista, a Wave driver is available on
request.