User Manual

UAX220v2 & UAX220-Mic
User manual
13
CONFIGURATION
UAX Manager
The UAX Manager application (available on the Digigram web site) allows
UAX220v2/UAX220-Mic to
• either work at a fixed frequency (32 kHz, 44,1 kHz or 48 kHz),
or at the frequency defined by the application
• to process the samples at 16 or 24 bits.
Default factory setting is: frequency fixed at 48 kHz, 24-bit sample resolution.
In the “sampling frequency set by audio application” mode, if the frequency of
the application is other than 32 kHz, 44,1 kHz or 48 kHz, then the UAX
works at 48 kHz and sample rate conversion is performed by the audio layers
of the operating system.
In the “Frequency fixed” mode, sample rate conversion is performed by the
audio layers of the operating system if the frequency of the application and the
frequency of the UAX are different.
UAX Manager under Windows