User Manual

VX222e & VX222e-Mic
User Manual
7
Additional hardware features VX222e-Mic
1 analog microphone input with
- high-quality preamplifier
- switchable 48 V phantom power
- analog expander/compressor/limiter
This input is mixed with the two line inputs before A/D conversion.
1 AES/EBU Sync input
The AES/EBU input is AES42 compatible (for connecting digital
microphone) and features a hardware sample rate converter
(for details
see chapter ‘Specifications’)
The two AES/EBU inputs on the VX222e-Mic allow:
- recording of a digital signal on the AES/EBU data input; this input is
also used as source of synchronization with a digital clock
- recording of a digital signal on the AES/EBU data input, synchronized
on a digital clock connected to the AES/EBU synchronization input;
- the synchronization of analog recording and playback on an AES/EBU
clock connected to the AES/EBU Sync input.
The selection of the digital input excludes the selection of the analog
inputs.
Main software features
Real-time, simultaneous PCM record and playback (8, 16 and 24 bits),
Float IEEE754 (with 24-bit fixed-point dynamic range)
When using the np SDK, real-time on-board mixing of several PCM
audio streams, direct monitoring, level adjustment, panning, cross-fades,
punch-in/punch-out, scrubbing
Possibility to control the parameters of the inputs and outputs (gains,
mutes, 48 V switch, analog compressor-limiter-expander parameters),
from the provided ‘Digigram Hardware Settings’ application, or from any
application that addresses these controls
24-bit DSP effects in playback and recording: 3-band parametric
equalizer plus Maximizer
Low latency DirectSound, ASIO, and Wave
∗∗
drivers
Note: the HR Runtime package for Windows Vista does not include a Wave
driver. In case your audio application explicitly requires a Wave
interface, a Wave driver is available on request. In this case, please
contact Digigram
.
AES/EBU sync input and hardware sample rate converter on the AES/EBU input on special
request on VX222e
∗∗
Windows XP and Server 2003 only