User Manual
VX820HR, VX822HR, VX820e, & VX822e
User Manual
13
• If the card you have installed is listed:
• Right click on the icon of the card.
• Select ‘Diagnostics’, and Play Sine. This plays in loop a
sine signal on the outputs of the card. You can also select
Play file to play in loop a file of your choice (PCM only).
If the playback is correct, the card is correctly installed
and works.
• To stop the playback, right click on the card icon, and
select Stop Activities.
• If the card is not displayed:
• Make sure that during the HR Runtime installation the
“Driver for the HR boards” has been selected in the
“Select components” window.
• Make sure that the card is correctly inserted in the PCI
slot, and screwed on the PC chassis.
• If necessary, uninstall the HR Runtime package as
described in this manual, and re-install it.
• If the Wave driver has been installed
∗
:
• Go to menu <Start>, <Settings>, <Control panel>,
<Sound and Multimedia>, tab “Audio”, Default device
(Playback device, Recording device). The card’s channels
can be selected. The card can be used with any Wave
application.
Available Wave recording and playback devices are:
• VX820HR/e (VX822HR/e) 1+2 (Wave) (record and playback)
• VX820HR/e (VX822HR/e) 3+4 (Wave) (playback)
• VX820HR/e (VX822HR/e) 5+6 (Wave) (playback)
• VX820HR/e (VX822HR/e) 7+8 (Wave) (playback)
• VX820HR/e (VX822HR/e) 5.1 (Wave) (playback)
• VX820HR/e (VX822HR/e) 7.1 (Wave) (playback)
• VX820HR/e (VX822HR/e) 5.1+2 (Wave) (playback)
• If the ASIO driver has been installed:
• The card is visible from any ASIO application.
Note:
5.1 plays on outputs 1, 2, 3, 4, 5, 6
7.1 plays on outputs 1, 2, 3, 4, 5, 6, 7, 8
5.1+2 plays on outputs 1, 2, 3, 4, 5, 6, 7, 8
∗
Windows XP and Server 2003 only; for Vista, a Wave driver is available on request.