User Manual

48 V phantom power on the input the mic is connected to.
To activate the 48V phantom power on an input, click on
the OFF button on the right of 48V for the concerned input:
. When 48V is enabled on an input, the button is
displayed as follows:
Note that any modification of the Pad from the software Control
Panel is reflected on the touch pad of Cancun, and vice versa.
Displaying the signal level on the AES/EBU input(s)
Click on the icon , on the bottom right of the “ANALOG”
window, to view the digital level on the inputs signals. A vu-
meter is displayed for each input channel, which gives the digital
level of the signal on the digital input, expressed in dBfs (0dBfs
is the maximum value of a digital sample).
To hide the digital levels panel, click on the icon .
15