User Manual

Output gains settings
The analog output gain is adjustable
with the upper rotary button when:
· the IN/OUT touch button on the
right of the rotary button is in
position OUT (green led in front of
OUT)
· and the touch button on the left of
the rotary wheel is active (green
led).
Pressing the button several times
allows selecting analog output 1, analog
output 2, both outputs, or no output
(LED turned off).
The analog gain adjustment is then
applied to the selected output(s).
Note that moving the rotary button
automatically updates the fader position
in the software control panel for the
concerned channels.
48V phantom power
In case you are using a static microphone on an
analog input, it is necessary to activate the 48V
phantom power on this input.
Press the “48v” touch button of the concerned input.
48v phantom power is enabled when a red LED
appears. It is disabled otherwise.
Note: in case several static microphones are used, it
may be necessary to connect the Cancun to a second
USB controller of the PC so as to get enough current
(a single USB controller may not provide enough
current).
20