User Manual

AES11 synchronization
Yes, on AES 1 Input Yes, on AES 1 Input
Other inputs
ADAT / S/PDIF* ADAT / S/PDIF*
* Not implemented yet. This will be available by software upgrade.
Outputs
CANCUN 222-Mic CANCUN 442-Mic
Analog line outputs (mono)
2 balanced 4 balanced
Maximum output level/
impedance
+10 dBu / 2x33 Ohms +10 dBu / 2x33 Ohms
Digital outputs (stereo)
1 AES/EBU 2 AES/EBU
Programmable output
attenuation
From 0 to -72 dB by 1 dB steps From 0 to -72 dB by 1 dB steps
Headphones output
Dedicated output stage, >10 mW from 32 to 600
Ohms
Bandwidth: 10Hz-20 kHz +-0.1 dB
Dynamic range : 93 dB @32 Ohms, typical
Dedicated output stage, >10 mW from 32 to
600 Ohms
Bandwidth: 10Hz-20 kHz +-0.1 dB
Dynamic range : 93 dB @32 Ohms, typical
Other outputs
ADAT / S/PDIF* ADAT / S/PDIF*
* Not implemented yet. This will be available by software upgrade.
Analog audio performances
Cancùn 222-Mic and 442-Mic
Frequency response (A/D Input)
· 20 Hz–20 kHz +0/-0.5 dB @48 kHz
· 20 Hz–40 kHz +0/-0.6 dB @96 kHz
· 20 Hz–80 kHz +0/-2.0 dB @192 kHz
S/N (A/D Input)
· S/N: 111 dBA - 108 dB unweighted @48 kHz, typical
THD + noise, ref 1 kHz at –3 dBfs (A/D Input)
· -105 dB THD+N / 20 Hz-20 kHz @48 to 192 kHz, typical
· -107 dBA THD+N / 20 Hz-20 kHz @48 kHz to 192 kHz, typical
Mic inputs E.I.N.
· -128 dB EIN / Zsource = 40 Ohms; Pad Off; gain 55 dB, typical
Frequency response (D/A Ouput)
· 10 Hz–20 kHz +0/-0.1 dB @48 kHz
· 10 Hz–40 kHz +0/-0.3 dB @96 kHz
· 10 Hz–80 kHz +0/-1.3 dB @192 kHz
S/N (D/A Output)
· S/N: -111 dB unweighted @48 kHz, typical
THD + noise, ref 1 kHz at –1 dBfs (D/A Output)
· -98 dB THD+N / 20 Hz-24 kHz @48 kHz to 192 kHz, typical
23