User Manual

CANCUN devices are delivered with a ‘Y’ USB cable allowing powering the device from two USB ports. It

is recommended to connect the two USB plugs so as to correctly power the CANCUN unit.

Cancun 222-Mic and CANCUN 442-Mic main hardware

features

● Simultaneous analog & AES I/Os in a compact form factor

● A/D and D/A conversions 24-bit / frequency : 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 192

kHz

● Excellent MIC preamp (55dB gain, from -60 dBu sensitivity, typical -105 dB THD+N, and -128 dB

EIN)

● Switchable 48V phantom power (7 mA Max on each input)

● Adjustable analog input gain from 0 to 55 dB, by 1 dB steps

● Switchable -30 dB input signal Pad (level attenuator)

● Maximum analog input signal: +25 dBu

● Guaranteed low latency (<4 mS) on both Windows™ and Mac OSX™ platforms

● Ergonomically advanced user interface for quick setup and efficient monitoring on both Windows™

and Mac OSX™ platforms

● Innovative hardware controls with LED-lighted touch panel

● Neutrik™ XLR connectivity and break-out cable

● Input channel 1 duplicated on an XLR input on the CANCUN, and on the breakout cable.

CANCUN 222-Mic

· 2 balanced analog mono line/mic inputs, +25 dBu max signal level

· 2 balanced analog mono line outputs, +10 dBu max signal level

· 1 additional balanced stereo AES/EBU input

· 1 additional balanced stereo AES/EBU output

· 1 stereo headphone output on female 6.35mm jack