User Manual

CANCUN 442-Mic

● 4 balanced analog mono line/mic inputs, +25 dBu max signal level

● 4 balanced analog mono line outputs, +10 dBu max signal level

● 2 additional balanced AES/EBU inputs

● 2 additional balanced AES/EBU outputs

● 1 stereo headphone output on female 6.35mm jack

Software features

● CANCUN 222-Mic and CANCUN 442-Mic comply with the USB Audio 2.0 specification

● Simultaneous record and playback on all the audio I/Os

● Supported formats: PCM 8, 16, 24 bits

● DirectSound devices

CANCUN 222-Mic: 2 stereo input devices (1 analog, 1 AES/EBU)

CANCUN 442-Mic: 4 stereo output devices (2 analog, 2 AES/EBU)

● ASIO devices

CANCUN 222-Mic: 4 mono input devices (2 analog, 2 AES/EBU)

CANCUN 442-Mic: 8 mono output devices (4 analog, 4 AES/EBU)

● Control Panel GUI for quick setup and efficient monitoring on both Windows™ and Mac OSX™(*)

platforms

● Mixing of the inputs and playback ouputs to the headphone output

● Host platform Control Panel synchronized with CANCUN touch panel

As Windows operating systems don’t feature the USB Audio 2.0 compatibility, it is necessary to install

a driver package. CANCUN devices are visible as DirectSound and ASIO devices. CANCUN is also

compatible with Kernel Streaming applications.

HARDWARE REQUIREMENTS

· Computer with at least Pentium Core 2 Duo CPU or equivalent recommended

· Two USB port (standard 2.0 or higher)

SUPPORTED OPERATING SYSTEMS

· Windows XP, Windows Seven (32-bit and 64-bit)

· Mac OS X

· Linux(*)

* Not available yet. Will be available by software upgrade

HARDWARE INSTALLATION

Connect the mini-B USB connector of the provided USB cable to the mini-B USB port located underneath

CANCUN.

Connect the 2 standard type A male USB connectors of the provided USB ‘Y’cable to two USB ports (USB

2.0) or your computer.