User Manual

VX881HR
&
VX882HR
User’s Manual
9
•
Select Diagnostics, and
Play sine
. This plays in loop a sine wave
signal on the outputs of the card.
You can also select
Play file
to play in loop a file of your choice
(PCM, MPEG layer 1 or layer 2).
If the playback is correct, the card is correctly installed and works.
•
To stop the playback, right click on the card icon, and select
Stop Activities
.
If the card is not displayed:
•
make sure you have installed the Driver for the HR board, from the
HR Runtime installation (check-box).
•
make sure that the card is correctly inserted in the PCI slot, and
screwed on the PC chassis.
•
if necessary, uninstall np Runtime package as described in this
manual, and re-install it.