User Manual

15
DigiGrid M
4.1.1 Resetting the Unit
If after an unsuccessful rmware update theDiGiGrid M is not recognized by MultiRack or SoundGrid Studio (the DiGiGrid M device
does not appear in the Inventory panel), you can use the Reset button to try to recover the unit.
The Reset button is on the DiGiGrid M side panel.
• Turn o the unit.
• Press and hold the Reset button.
• Restart the unit while holding the button.
• Release the Reset button once the device has fully booted.
The unit is now in “force update” mode, and a new rmware update can be performed.
4.2 Identifying a Device from the SoundGrid Studio Device Rack
Just below the FW button is an ID button. Clicking on this button activates LEDs on the back panel of the hardware device.
This serves the same function as the Identify button on the Control Panel Top Bar.