User Manual

31
DigiGrid M
7.3 eMotion ST Mixer Patching
The eMotion ST mixer enables you to create studio monitor mixes as well as personalized headphone mixes. Patch to and from the
mixer using the eMotion ST input and output tabs on the left side of the interface. The green buttons indicate whether a channel is
mono, left side of a stereo pair, or right side of a stereo pair. Toggle between these states by double-clicking on the button.
To learn more about patching between devices or to and from the eMotion ST mixer, please refer to the SoundGrid Studio
Application user guide.
A few things to remember about the Patch page:
• All available devices and driver channels will appear in the patch. The number of channels depends on devices and connections.
• Patch direction is indicated by an arrow on the left side of the patch.
• Establish a patch by clicking on a cell, or by dragging across several cells. Remove a patch by clicking on it again.
• An output can patch to two inputs. An input can accept only one source.
Use the tabs at left to choose among the patch options.