Datasheet

ManualsBrandsDIGILENT ManualsDev KitsPSU

Digilentinc.com Blog Learn

Accessories

Screws, clips, speakers, battery holders, cables, wires, and other assorted useful parts.

Software Defined Radio (SDR) Kit

• Contains all the parts needed to construct a complete software radio station

with a Xilinx ML605 & an Analog Devices FMCOMMS1 board (boards sold seperately)

• Kit includes:

◦ 2 plexiglass covers

◦ cooling fan

◦ mounting hardware

◦ 2 antennae

USB A to B cable

• Nearly 5 feet in length

• Part# 250-059

USB A to mini B cable

• Nearly 5 feet in length

• Part# 310-054P

USB A to micro B cable

• Nearly 5 feet in length

• Part# 310-053P

IR Range Sensor

• Measuring range: 10-80 cm

• Current consumption: 30mA typical

• Supply voltage: 4.5 - 5.5 V

• Includes 10" 3-wire cable

BNC Oscilloscope Probes (pair)

• BNC-terminated

• Selectable 1X/10X input attenuation

• Contraction hook tip

• 12cm ground clip

• Localization sleeve adapts to IC testing

Mini "Grabber" test hooks

• Lightweight and durable construction

• Two signal connection points for Discovery signal wires

• Six colors coordinated to Discovery signal wire colors

• Able to grasp conductors up to 1.27mm in diameter

Page 1 of 6

Summary of content (6 pages)

PAGE 1
Page 1 of 6 Digilentinc.com Blog Learn Search Accessories Screws, clips, speakers, battery holders, cables, wires, and other assorted useful parts.
PAGE 2
Page 2 of 6 IR Proximity Sensor (2-pack) • Fairchild QRB1134 Phototransistor Reflective Object Sensor • Ideal for use with the PmodLS1 • Part# 240-012 40-pin DIP Socket • • • • Perfect for our C-MOD or anything in the 2x20-pin DIP package Current rating: 1Amp Contact resistance: 20mΩ max Note: This product has pins for through-hole mounting and is not suitable for surface mounting.
PAGE 3
Page 3 of 6 • Can be used with the XUPV2P board • Part# D350-000 256Mbytes DDR DRAM • 256Mbytes of fast DDR DRAM • Can be used with the XUPV2P board • Part# 350-001 Battery Holder (4 x AA) • • • • Holds four AA cells Header connector for easy connection to many Digilent boards Polycarbonate construction Part# 163-165 Battery Holder (2 x AA) • • • • Holds two AA cells Header connector for easy connection to many Digilent boards Polycarbonate construction Part# 163-043 Solderless Breadboard Kit - Small
PAGE 4
Page 4 of 6 • Part# 310-035P UART Crossover Cable • 6", 6-pin crossover cable • Connects newer UART-interface Pmods (PmodBT) to older microcontroller boards (Cerebot 2, Cerebot 32MX4, etc.) • Connects older UART-interface Pmods (PmodCLS, PmodRS232, etc.) to newer microcontroller boards (Coming soon) • For more information on where / how to use this cable, please see this document.
PAGE 5
Page 5 of 6 • Includes a 6" 6-pin cable, a 6-pin gender changer, and a 6-pin right angle male header.
PAGE 6
Page 6 of 6 • • • • Ships in pack of 5 Can be used with any Digilent board Ideal for testing and verification Part# 240-006 / 240-007 1 Pin MTE Cable • • • • • 6" in length Ships in pack of 5 Can be used with any Digilent board Ideal for testing and verification Part# 240-005 2 Pin MTE Power Cable • Provide power to battery connection on a Digilent Board • Provides access to any 2 signals that are tied to any 100mil spaced pins • Part# 310-025P Protective covers for your XUPV2P board.