User manual

1300 Henley Court

Pullman, WA 99163

509.334.6306

www.digilentinc.com

PmodTPH2™ Reference Manual

Revised May 24, 2016

This manual applies to the PmodTPH2 rev. A

DOC#: 502-081

Other product and company names mentioned may be trademarks of their respective owners.

Page 1 of 2

Overview

The PmodTPH2 is a 12 point test header, giving users easy access to any signals passing through the Pmod.

1 Functional Description

Offering 12 isolated pass through connectors, this module is able to easily able to be placed between two pieces of

hardware allowing the user to observe and debug their circuit.

2 Interfacing with the Pmod

Attach your multimeter or oscilliscope (such as the Analog Discovery) to the vertical test point headers and

measure away!

The PmodTPH2.

 12 external test point headers

 Easily access and test signals passing

through

 Small PCB size for flexible designs 1.3“ ×

0.8” (3.3 cm × 2.0 cm)

 12-pin Pmod connector with GPIO interface

 Follows Digilent Pmod Interface

Specification Type 1

Features include:

PAGE 1
300 Henley Court Pullman, WA 99163 509.334.6306 www.digilentinc.com PmodTPH2™ Reference Manual Revised May 24, 2016 This manual applies to the PmodTPH2 rev. A Overview The PmodTPH2 is a 12 point test header, giving users easy access to any signals passing through the Pmod. Features include:      12 external test point headers Easily access and test signals passing through Small PCB size for flexible designs 1.3“ × 0.8” (3.3 cm × 2.
PAGE 2
PmodTPH2™ Reference Manual Pin 1 2 3 4 5 6 Signal 1 2 3 4 5 6 Header J1 Description Pin Pass through #1 7 Pass through #2 8 Pass through #3 9 Pass through #4 10 Pass through #5 11 Pass through #6 12 Signal 7 8 9 10 11 12 Description Pass through #7 Pass through #8 Pass through #9 Pass through #10 Pass through #11 Pass through #12 Table 1. Pinout description table. Any external power applied to the PmodTPH2 must be able to be handled by your two pieces of hardware on either side of the Pmod.