Datasheet

PmodOLED™ Reference Manual
Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
Page 3 of 3
Connector J1
Pin
Signal
Description
1
CS
SPI Chip Select (Slave Select)
2
SDIN
SPI Data In (MOSI)
3
None
Unused Pin
4
SCLK
SPI Clock
7
D/C
Data/Command Control
8
RES
Power Reset
9
VBATC
V
BAT
Battery Voltage Control
10
VDDC
V
DD
Logic Voltage Control
5, 11
GND
Power Supply Ground
6, 12
VCC
Power Supply
Table 1. Interface connector signal description.
For more information on the OLED display interface, see the UG-2832HSWEG04 datasheet available online or from
Univisio.
The OLED display uses a compatible command set from the SSD1306 device. For more information, see the
SSD1306 datasheet available at www.solomon-systech.com.