Datasheet

PmodACL2™ Reference Manual
Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
Page 3 of 3
The PmodACL2 also has two programmable interrupt pins available for use. Both of these pins can be set to trigger
an interrupt upon multiple different triggers including activity/inactivity (to help reduce system power), when the
FIFO buffer is filled to a desired level, when data is ready to be retrieved, and other triggers.
Any external power applied to the PmodACL2 must be within 1.6V and 3.5V. Consequently, with Digilent system
boards, this Pmod must be run off of a 3.3V rail.
3 Physical Dimensions
The pins on the pin header are spaced 100 mil apart. The PCB is 0.95 inches long on the sides parallel to the pins on
the pin header and 0.8 inches long on the sides perpendicular to the pin header.