Datasheet

Callout Component Description
5 PROG and user reset buttons
6 Power LED
7 Digital Pmods
8 JTAG header
9 User slide switches
10 User LEDs
11 OLED display
12 Dual analog/digital Pmod
13 User pushbuttons
14 FMC HPC
15 Fan header
16 VADJ jumper
17 micro SD slot
18 3.5mm audio jacks
19 DisplayPort source connector
20 DisplayPort sink connector
21 VGA connector
22 HDMI source connector
23 FPGA configuration source jumper
24 HDMI sink connector
25 Power switch
26 Power jack 12VDC
Table 1. Genesys 2 features and connectors.
1. Quick-start
The Genesys 2 comes with an out-of-box demo design t
hat gets loaded from the on-board QSPI flash. It exercises most
of the on-board peripherals. Just power the board with the included 12V wall supply, flick the power switch, wait for the
design to fully load and explore the following features:
• Connecting an HDMI/DVI, VGA, or DisplayPort monitor shows a demo image with a mouse pointer.
• Connecting a USB mouse controls the mouse pointer on the display.
• The OLED shows the Digilent logo and various information on several pages. Advance between pages with the
BTNC button.
• The internal FPGA temperature, voltage and current readings of various power rails are shown on the OLED.