Datasheet

Accelerometer and gyroscope register description LSM9DS1

60/72 DocID025715 Rev 3

Table 100. INT_GEN_DUR_G register description

The DUR_G [6:0] bits set the minimum duration of the interrupt event to be recognized.

Duration steps and maximum values depend on the ODR chosen.

The WAIT_G bit has the following meaning:

‘0’: the interrupt falls immediately if the signal crosses the selected threshold

‘1’: if the signal crosses the selected threshold, the interrupt falls after a number of samples

equal to the value of the duration counter register.

For further details refer to Figure 29 and Figure 30.

Figure 29. Wait bit disabled

WAIT_G

Exit from interrupt wait function enable. Default value: 0

(0: wait function off; 1: wait for DUR_G [6:0] samples before exiting interrupt)

DUR_G [6:0]

Enter/exit interrupt duration value. Default Value: 000 0000

 :DLW ELW µ¶Æ

,QWHUUXSWGLVDEOHGDVVRRQDVFRQGLWLRQ

LVQRORQJHUYDOLGH[5DWHYDOXHEHORZWKUHVKROG

5DWH

GSV

5DWH

7KUHVKROG



WQ

,QWHUUXSW

&RXQWHU

'XUDWLRQ

9DOXH

³:DLW´

'LVDEOHG